SPECIFICATIONS
Overview
- Ethernet switches allow all devices to transmit simultaneously, without collision.
This is essential for enabling deterministic delivery of time-critical information.
Switches are intelligent devices, keeping track of device locations; this allows messages to be transmitted only from the necessary port, improving the overall performance of the network.
Technical Information
Ethernet protocols supported - IEEE 802.3 protocols
RJ45 ports (shielded) - 10 BaseT / 100 BaseTX
RJ45 speed (10 or 100 Mbps) - Auto-negociation
RJ45 MDI / MDIX and TD/RD - Auto-crossover & auto-polarity
Fiber optic port wavelength - 1300 nm center
Fiber optic multi-mode (mm) Optimal - 62.5/125 um (SC or ST connector)
Fiber maximum distance (full duplex) - 4 km (mm), 20 or 40 km(sm) or more
Fiber optic single-mode (sm) Optimal - 9/125 µm (SC or ST connector)
Fiber maximum distance (full duplex) - Maximum distance of 20 km (sm)
Typical latency for 100 Mbps ports - 5 us + frame time (varies on load)
Full or half duplex operation - RJ45: full / half duplex - Fiber: full duplex
MAC addresses supported - 1024 (5 port) / 2048 (8 port)
Memory bandwidth - 3.2 Gbps
Mounting - DIN rail or panel mount
Input power - Typical all ports active at 100 Mbps - 3.6W to 6.3W (refer to user’s manual)
Input voltage - 10 - 30 V
Ethernet isolation - 1500 VRMS 1 minute
Operating temperature - -10ºC to 60ºC (14ºF to 140ºF)
Storage temperature - -40ºC to 85ºC (-40ºF to 185ºF)
Humidity (non-condensing) - 5 to 95% RH, non-condensing
Vibration - IEC68-2-6
Electrical safety - EN61010-1 (IEC61010)
EMI emissions - FCC part 15, ICES 003, EN55011 ; Class A
EMC immunity - EN61326
UL approval - UL 508 (E205563) UL 1604 (E314891) - Class 1, Div 2 - Groups A, B, C & D Hazardous Locations
Packaging - IP30 protection
Dimensions - Height: 142.24mm (5.60”) - Depth: 102.36mm (4.03”) - Width: 5-port: 27.18mm (1.07”) - 8-port: 38.74mm (1.525”)
Features
- 5-port unmanaged switch
- Plug and Play - no setup required
- Auto-sensing, auto-polarity and auto-crossover
- DIN rail or panel mount
- Redundant, dual DC power inputs